Alright, I decided to kick of with the weapons station, there are a lot of parts for this little (but important) part
Base (13 parts):
Watch out on the instructions here as them seem to indicate that there are 16 of the IR smoke grenades (F39) when there are only 4. If used, these would usually be arranged with 1 or 2 in each of the 4, so I went with 1 each.
Cradle (6parts):
There are a few sink holes here, but they're hidden so no biggy.
Camera/LRF (Cradle+5parts):
Arms/Motor Housing (13parts+cradle+base):
I also added the wires for the smoke pots (really nice of AFV club to provide the attachment point too
)
An idea of some of the parts' sizes, that little green thing below the knife is part G24....
Mk19 Mod3 (3parts):
Drilled out the barrel as is absolutely necessary on something of this caliber
(Just test fitted in the pic)
There is large pin/extrusion on the inside of part G5 that needs to be removed as it interferes with the fit, you can see it on the right hand side of this photo.
Added the camera cable and canvas in the back (the cable is the wire just left of the paper)
Lastly the Ammo box (3parts + 2 PE chains):
The PE chains are a little long, but this is okay as it leaves you with a spare length for the back of the cradle.
Threaded Mode
